No products in the cart
Trojan Hydraulic Caliper
Trojan hydraulic caliper to suit 10-inch and 12-inch Trojan disc rotors.
These are cast in SG iron and are Electro Zinc Plated to protect against corrosion. Trojan calipers are fitted with a Phenolic piston, a high-strength, non-rusting material. Fittings, such as slide pins and bleed screws, are brass, while other fittings are Stainless Steel.
- 10-inch and 12-inch disc rotors
- 1500kg per axle with 225mm rotors
- 2000kg per axle with 275mm rotors
- Suitable for disc thickness from 10mm to 15mm
The latest Trojan hydraulic caliper park brake mounts onto a threaded anchor plate.
Hydraulic Park Brake Handles
Trojan park brake handles secure your boat trailer when parked. Fit all existing hydraulic Trojan calipers.
In Australia, park brake handles are not mandatory for boat trailers. However, if you have a $100,000 boat, adding a hand brake handle makes sense to prevent the boat trailer from rolling away.
Trojan caliper slide bolts are factory secured with locktite. Further, we do not recommend installing park brake handles as a DIY. Instead, have your local trailer or boat repairer install this device.
Trojan recommends the two stainless screws provided with the park brake handle be locktited into position. This procedure returns the caliper to the manufacturer's requirements.
Note 1: It also fits Alko hydraulic calipers, provided you replace the Alko slide pins with Trojan slide pins.
Note 2: Install the parking brake at the rear of the rotor.
Replacement Trojan Spare Parts
- Dacromet Caliper incl pads
- The Stainless Caliper includes stainless brake pads
- Hydraulic Disc Pads
- Trojan Stainless Disc Brake Pads
- Replacement Hydraulic Phenolic Picton (loose) MK3 1978 -ONWARDS
- Replacement Slides (2 pcs)
- Hydraulic Bleed Nippled (1 pcs)
- Hydraulic Park Brake Handles
Boat trailer parts for Trojan Mark 5, 6 and 7 are out of production.
Trailer weights exceeding 2000 kg require independent control and breakaway facility, causing the brake activation in emergencies.
Tip: When changing or checking disc pads, squeeze the piston home a little by applying a G clamp to the piston.
As a result, this procedure will give you extra room to insert the disc pads.
Further, when inserting a piston, apply a small amount of silicone lubricant to the piston. Silicone lubricant does not contaminate hydraulic brake fluid like grease.
Trojan Hydraulic Disc Caliper Parts
|Dimensions||10 × 15 × 20 cm|
Stainless Steel, Dacromet, Left Park Handle, Right Park Handle