Brake Cable Kit

The brake cable kit is suitable for installing electric brake park brake levers, mechanical override drum brakes and mechanical override disc brake calipers.

The caravan cable kit comprises 10 meters of cable, four-wire rope grips and one cable brake adjuster.

Cable Kit Contents

• 1 x Cable Adjuster
• 4 x Wire Rope Grips
• Cable

The trailer cable brake adjuster removes the slack from the cable. The brake adjuster is inside the electric backing plate or on the back of the caliper arm. Do not use the cable brake adjuster to adjust your brakes.

How to adjust Trailer Cable Brakes

Disc calipers on boat trailers have an adjusting bolt on the back of the caliper arm.

Adjust this nut first by adjusting until pads are hard against the rotor and the rotor is unmovable, then back the nut off 1/2 turn.

Adjust cable until taunt using the cable adjuster. Do not over-tighten.

Purchase associated parts here

• Park Brake Handles to suit Boat Trailers
• Override Park Low Profile Hand Brake by AL-KO
• 2t Override Coupling Al-ko
• 3500kg Electric Coupling with Lock
• Mechanical Disc Brake Caliper Parts
• 10-inch Electric Backing Plate Brake Kit
• 12-inch Electric Backing Plate Brake Kit