45mm Slipper Hanger Kit

45mm Slipper Hanger Kit suited to single axle trailers up to 1000kg and tandem trailers up to 2t.

Use only on 6mm springs with 3 leaf tails. (765mm eye to tail)

Important the hangers are installed 700mm from the centre of the eye to the centre of the back hanger.

Hangers installed greater than 700mm centres will cause the rear leaf to jump out under shock loading conditions like deep potholes in the road.

Hangers installed closer than 700mm centres will cause the spring to lock in the rear hanger and break.

• The bolts supplied are 1/2 inch.
• Most 6mm springs have 1/2 inch ID bushes with 22mm OD.

Wrong hanger location causes Spring Problems

Single Slipper Kit comprises

• Two Bolts + Nylocks
• 2 x Rear keepers
• 2 x Front Hangers

The Tandem Slipper Kit comprises

• Four Bolts + Nylocks
• 2 x Rear keepers
• 2 x centre Hangers
• 2 x Front Hangers

A Slipper Hanger Kit is used with these springs

• 45mm x 765mm Black and Galvanised Slipper Spring