45mm Slipper Spring
45mm slipper springs are available in two lengths, 710mm and 765mm and are suitable for metropolitan travel or highway travel with light loads.
45mm x 6mm x 765mm long Spring Ratings are
- 3 Leaf – 300kg each
- 4 Leaf – 450kg each
- 5 Leaf – 500kg each
- 6 Leaf – 600kg each
- 7 Leaf – 675kg each
- 9 Leaf – 800kg each
6mm Slipper Spring Specifications
- 765mm Eye to Tail.
- 6mm Leaf Thickness
- 1/2 inch x 7/8 inch x 45mm bush.
- Free Camber 150mm
- Eye to Center Bolt 330mm
- Hanger Centers 700mm
45mm x 8mm x 710 long Spring Ratings are
- 3 Leaf - 425kg each
- 4 Leaf - 550kg each
- 5 Leaf - 675kg each
- 6 Leaf - 750kg each
- 7 Leaf - 850kg each
Slipper Spring Specifications
- 710mm Eye to Tail.
- 45mm wide x 8mm thick leaves
- 9/16 inch x 7/8 inch x 45mm bush.
- Free Camber 150mm
- Eye to Center Bolt 330mm
- Hanger Centers 670mm
Slipper Spring Derating
Slipper springs are rated at 120% of full load for all single, tandem and tri-axle sets.
For example, a tandem trailer weighing 2,000kg x 120@ = 2,400kg
Axles, springs and associated equipment must rate a total of 2,400kg
Why derate trailer slipper springs?
- Usually, it is common practice to use 2 x 40mm Square axles on a 2000kg trailer. Wrong.
- 6mm slipper springs do not load share or transfer load across both axles.
- For example, each wheel in the above example has a loading of 2,000kg / four wheels or 500kg per wheel.
- Mount a gutter using only one wheel, and the wheel on the same side is lifted off the ground.
Additional information
Weight | N/A |
---|---|
Dimensions | 5 × 20 × 77 cm |
Select Leaf Size | 3 Leaf, 4 Leaf, 5 Leaf, 6 Leaf, 7 Leaf, 9 leaf |
Black or Galvanised | Black Powder Coated, Galvanised |
Select Leaf Thickness | 6mm, 8mm |