Unbraked Galvanised Lazy Hub

Galvanised Lazy Hub

Galvanised Lazy Hubs are available for use on boat trailers with 14-inch wheels or smaller.

All 150mm hubs are made in Australia by Couplemate.

Holden Bearings, Slimline bearings or Composite bearings are suitable for these five-stud galvanised lazy hubs.

Japanese Bearings use with these hubs are

• 1450kg for Sl Ford Bearings
• 1000kg for Holden LM bearings

Note: No Bearings or wheel nuts. 

We recommend the use of chrome dome nuts to eliminate rusty rust that makes it impossible to remove wheel nuts.

How to install an unbraked hub onto an axle

In particular, learn how to install marine seals. The same installation techniques apply to the installation of electric brake drums and disc rotors. As a result of using these installation techniques, you will achieve many maintenance-free journeys.

Galvanised Lazy Hub is available in the following PCD.

• Ford 5 Stud S/L (5 x 114.3 PCD 1/2 studs)
• HT/Torana (5 x 4.25” PCD 7/16 studs)
• HQ (5 x 4.75" PCD 7/16 studs)
• LandCruiser (5 x150 PCD 9/16 studs)

We recommend Japanese bearings for high-speed highway use and the longevity of your trailer bearings. Check your bearings yearly for water ingress or black carbon deposit in your grease. Carbon black represents bearing wear, so they will need replacing. Carbon black comes from wear on the casing of the bearings.

In summary, galvanising unbraked trailer hubs has a negligible effect on the load rating. Should the weakening of centres concern you, Read this article.