Spare Wheel Carrier Incl Bare Stub

Spare Wheel Carrier Rescue Kit - Galvanised suit boat trailers

Spare wheel carrier kits are galvanised to suit caravans and boat trailers. The kit bolts onto 75mm and 100mm drawbars.

Bearing Profiles are

1. Holden LM bearing profile
2. Ford Slimline bearing profile
3. 1.6t Dexter Profile

Tube length variations is:

• 400mm

The spare wheel holder mounts on the drawbar, near the trailer winch post. Install greased bearings inside the spare hub or disc rotor, ready for use in the event of a breakdown.

Holden LM Bearing Kit consists of the following bearings:

• Inner ID 31.75mm, OD 59.10mm
• Outer ID 19.05mm, OD 45.20mm
• Seal ID 37.5mm, OD 59.10mm
• Dust Cap 45.20mm

Ford Slimline Kit:

• Inner ID 35.00mm, OD 59.10mm (68149)
• Outer ID 22.00mm, OD 45.20mm (12749)
• Seal ID 43.9mm, OD 59.10mm (492015)
• Grease Cap 45.20mm (CM497)

1.6t Dexter Bearing Kit (3500lbs)

• Inner ID 35.00mm, OD 59.97mm – LM68149/111
• Outer ID 27.00mm, OD 50.29mm – LM44649/10
• Seal ID 44mm, OD 65.22mm – GS-1719DL
• Grease Cap 1.98″

2t Alko Bearing Profile (380mm Long)

• Inner ID 50mm, OD 89.96mm – HR30210
• Outer ID 31.75mm, OD 61.95mm – 15123/15245
• Seal ID 60.3mm, OD 89.96mm – 64607
• Dust Cap OD 63mm – DC2

Galvanised spare wheel rescue kit includes:

• 2 galvanised bolts plus galvanised nylocks and galvanised washers
• 50mm x 50mm galvanised vertical holder
• 1 x backing plate to suit 75mm and 100mm drawbars.
• 1 x 39mm Round Galvanised axle plus castellate nut and split pin
• Castellated nut to retain axle inside 50mm square tube
• Select your galvanised hub.