Trailer Plug Cover suit Anderson Plugs

Trailer Mount Anderson Plug Cover

Trailer mount Anderson plug cover suits Anderson power connector for all 4WD, battery charges, camper trailers and caravans using auxiliary power.

Place top cover over the bottom assembly and screw clamp assemblies together with 2 insulated nylon screws and nuts.

Specifications

• 50A
• 120A
• 175A

Also, look at the Car Connector Covers with locking tabs, click here

Note: Plugs are not provided.

12v electricity can be extremely troublesome when terminals become dirty. In fact, dirty terminals are the second greatest cause of connection failure.

The most significant cause of electrical failure in caravans and trailers is oxidization inside the trailer plug. Oxidisation prevents effective electrical connection.

Furthermore, it is essential to keep electrical connections dry otherwise they will fail. Water is conductive and corrosive therefore it is essential to isolate electric plugs from water.

Applications

• Camper Trailers
• Caravans
• Forklifts
• Solar Panels
• Battery Chargers
• Dual Batteries
• Extra Caravan Battery

Installation Instructions

1. Place top cover over the bottom assembly and screw clamp assemblies together with 2 insulated nylon screws and nuts.
2. Slide cable gland weather seal over the main wiring and tighten gland nut to secure wire entry. UV protection place Rubber Cover over connector when not in use.

Helps your electrical connections remain safe and reliable, secure and dry thus helping to prevent tracking and short circuits.

Re-route or rewire the larger cabling from the 12-pin plugs through an Anderson plug to eliminate voltage drop in smaller cables.

Purchase more plug covers from the links below

• 50A Mount Car Plug Cover suits Plugs
• 50A LED Screw Connector
• 50A Anderson Plug Voltmeter
• Trailer Plug Cover suit Anderson Plugs
• 50A Plug Cover for Anderson Plugs

Trailer Mount Anderson Plug Cover