No products in the cart
50mm Round Galvanised U Bolt
50mm Round Galvanised U-bolt by Couplemate. Available Sizes 100mm, 112mm, 125mm, 137mm, 150mm, 162mm, 175mm and 200mm
U-bolt kit includes 1/2-inch rolled threads with gal flat washer + gal nylock. The thread length is 60mm.
How do I calculate or measure the correct length?
- Spring width plus
- Axle Pad 8mm plus
- Axle width plus
- Nyloc plus
- Read why u-bolts could be the primary cause of accidents.
- This article is the catastrophic result of the incorrect tightening of u-bolt on a truck chassis.
How to Measure U bolts (example)
You must retighten u-bolts approx 200lkms after installation due to steel's ability to stretch a little under load.
Furthermore, we stress-tested these u-bolts during manufacture and batch test until destruction.
Destruction loads exceed 17,000kg for 1/2-inch galvanised u-bolts.
Finally, our u-bolts are derated to 375kg each or 1500kg per set of 4 or enough u-bolts to suit a single axle.
The max rating of 750kg axles is 750kg with ubolt rating @ 1500kg.
Vibration fatigue can loosen mild steel u-bolts if not re-tightened after 300 km.
|Dimensions||1 × 7 × 21 cm|
Length: 100mm (4"), Length: 115mm (4.5"), Length: 125mm (5"), Length: 150mm (6"), Length: 175mm (7"), Length: 200mm (8")