2t – 3t Mechanical Disc Braked Bare Axle

2t - 3t Mechanical Disc Braked Axle Kit

2t - 3t mechanical disc braked axle kit utilises a 50mm square galvanised to form the basis of boat trailer setup.

The axle is not galvanised howver, (some image show a galvanised axle)

The 50mm square mechanical braked axle kit is a robust choice, and when you use it in tandem, extend the rating 4.5t

The Axle Kit Consists of the Following

• 50mm Bare Square Axle (Not galvanised)
• 2000kg Mechanical Al-ko caliper brake (2)
• Anchor plates welded to the axle
• 5 or 6 studs with the 12-inch disc rotor (2)
• 2.25-tonne Japanese bearing kits with bearing seal and dust cap (2)
• Bearing Collars (2)
• Wheel Nuts
• Assembled and tested

Galvanised axle kits have almost zero chance of rusting.

Purchase galvanised Rocker Rollers here.

Calculating the face-to-face measurement on your axle is important to know whether this would be the right fit. Here’s how you can do it:

1. Measure the whole wheel offset, that distance between the inside of the hub inside the rim and the outside of the rubber
2. Measure the distance between the chassis and rubber or add 25 mm
3. Add the chassis width by multiplying the number by 2

Technical Specifications

• Weight -  120 kg.
• Dimensions - 200 x 30 x 30 cm.