2 inch Tow Bar Receiver Mount – 3 Sizes

$89.85$120.00 inc GST

Clear
Add to Wishlist
Add to Wishlist
SKU: 50mmhollowreceiver Categories: , , ,

Tow Bar Receiver Hitch Kits

The tow bar receiver hitch kits fit standard 50mm tow bars with ratings between 2,000kg and 3,500kg. This receiver bar or ball mount suits the 50mm x 50mm square steel box section.

50mm Drop (Fabricated Short)

  • 160mm – Centre pin to the centre of the tow ball
  • 80mm from the back of the assembly to the centre pin.
  • 60mm from the centre of the pin to the flange.
  • 3.5t Rating
  • No tow ball.
  • (CM521-160)

50mm Drop (Fabricated Long)

  • 280mm – Centre pin to the centre of the tow ball
  • 80mm from the back of the assembly to the centre pin.
  • 170mm from the centre of the pin to the flange.
  • 3.5t Rating
  • No tow ball.
  • (CM521-280)

50mm Drop (Fabricated Extra Long)

  • 310mm – Centre pin to the centre of the tow ball
  • 80mm from the back of the assembly to the centre pin.
  • 170mm from the centre of the pin to the flange.
  • 2.5t Rating
  • No tow ball.
  • (CM521-310)

Ensure your 2-inch tow bar receiver mount rating is within your trailer weight before purchasing tow bar receivers.

The rating of a solid 50mm towbar ball mount is Class IV or 4t depending on the grade of your tow bar. If your tow rating is 3.5t, then the rating of your tow bar receiver is 3.5t.

50mm hitch receiver bar under 3.5t used in conjunction with the vehicle standard certification and the tow bar rating, whichever is lower.

Towbars undergo static load testing upon installation.

Your tow bar installer will use the Australian Standards when certifying your tow bar.

Warning: Inspect hitch pins and pin clips at least yearly for wear and tear. Clips may become loose and require replacement. It is possible clips can fall out due to repetitive removal and re-insertion. Therefore, they must be examined for tightness regularly.

Suitable for towing boat trailers, horse floats, caravans, and trailers. Not suited to heavy-duty weight distribution hitches.

Other important towing links

  1. Dee Shackles and Safety Chains
  2. Dee Shackle Tips to Select the Correct Size
  3. Pro Series Towbar Adjustable Ball Mount
  4. 12 Pin Car Socket with LEDs

2 inch Tow Bar Receiver Mount

Additional information

Weight N/A
Dimensions 8 × 15 × 40 cm
Select Receiver Length

160mm, 280mm, 310mm

Reviews

There are no reviews yet.

Be the first to review “2 inch Tow Bar Receiver Mount – 3 Sizes”

Your email address will not be published.