TrailSafe Bluetooth Breakaway Switch

$184.00 inc GST

2 in stock

Add to Wishlist
Add to Wishlist

TrailSafe Bluetooth Breakaway Switch

Trailsafe Bluetooth breakaway switch connects paired to a monitor (trail check) on the vehicle's dashboard. (see description below)

Trailersafe constantly monitors the breakaway battery, sending data to the vehicle dashboard.

Bluetooth conductivity up to 20 meters. If you live in NSW, you will also require the trailer check monitor at the bottom of the page.

Note: Adjust the lanyard to suit the length of the safety chains and ensure the pin is pulled when chains reach full stretch.

Bluetooth Breakaway Key Features

  • Bluetooth and wired connectivity options for in-vehicle monitors.
  • Intelligent time-out to protect brakes.
  • Works off house battery – no additional battery required!
  • LED status indicators for full-system safety check at trailer tongue.
  • Meets Australian regulations for breakaway systems on trailers over 2000kgs.
  • When used with the TrailCheck Monitor or with a suitable wired monitor, it meets NSW regulations.
  • Tests pull pin functionality as well as battery health.
  • Drives brake lights and electric brakes in the event of a breakaway.

Towing a trailer safely and legally.

Australian Design Rule mandates that all trailers having a gross trailer mass over 2,000 kg should utilise a break-away safety system on all wheels. The emergency braking system must also be capable of automatically activating should the trailer become detached from the tow vehicle. In such a situation, the brakes must remain active for 15 minutes.

TrailSafe Bluetooth Breakaway Switch is a highly effective break-away safety system designed to activate the electric brakes of a trailer or a caravan in a disconnection from the towing vehicle. TrailSafeBT takes convenience further by utilising the trailer’s house battery to power the brakes in a break-away situation. This means there is no need to maintain a second battery in your trailer throughout the year.

TrailSafeBT also indicates the charge status of the house battery. It also checks the condition of the pull pin and the effective activation of the brakes. This is transmitted through a wire to a remote monitor and by Bluetooth wireless to the optional TrailCheck.

If the towing vehicle becomes separated from the trailer, a mechanical pull pin is removed from TrailSafe, thus detecting a disconnection. The brakes and brake lights are activated upon disconnection as long as the charge remains in the trailer battery or until the pin is replaced.

Power Supply Mode 12V
Compatible: all types of lead-acid batteries with a capacity greater than 50Ah; LiFePO4 batteries with a total of 100Ah or greater
Pull Pin Integrity – checks system wiring providing fault indication LED
LED function: with the pin removed or brakes applied:

  • GREEN when the battery is good
  • ORANGE when battery condition should be checked

Find the full range of BMPRO products below

Additional information

Weight 0.5 kg
Dimensions 8 × 8 × 20 cm


There are no reviews yet.

Be the first to review “TrailSafe Bluetooth Breakaway Switch”

Your email address will not be published.