BC300 plus Commlink

$339.50 inc GST

Out of stock

Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
SKU: BC300 Category:

BC300 plus Commlink Monitors all Connections Directly from the Battery

BC300 plus Commlink External Shunt provide additional 300 Amp battery monitoring for your BatteryPlus35 and J35 systems.

The BatteryPlus35 and J35 battery management systems allow high current loads and external charge sources to connect directly to the battery via the BC300 External Shunt.

This enhances system behaviour with temperature monitoring of the battery for greater protection.

Key Features

  • High current/external charge  monitoring
  • Wireless Bluetooth communication to Commlink – easy to install/retrofit
  • DIY installation and simple pairing procedure

Connect these models below to your Smart Android Phone or iPhone via the Commlink.

Connection Sequence

BC300 ➙ Commlink ➙ J35 or BatteryPlus ➙ Smart Phone

Battery Properties Monitored

  • Voltage
  • Current (charging / discharging)
  • Energy usage (Ah)
  • Temperature (not displayed)

BC300  also provides your BatteryPlus35 and J35 with additional information on battery usage, so your displays, such as the Trek, JControl and JHub, are always up-to-date on battery Time Remaining and the State of Charge.

Specifications

Output 0.9/3.0/4.0 Amps
Input 240V, 50Hz
Battery Size 12-12 Ah
Type Lead Acid, LiFePO4
Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4
Charger Type Multi-stage
Power Supply Mode 12V

Note: After connection, depressing the right-hand button on the Commlink activates the Bluetooth connection between BC300 and the Management System

Tech Tips from David Bayliss

BC300 CommLink: This product is one of our top-selling items and continues to grow in popularity. Let's look at why it is becoming such an essential addition to a battery management system.

The BC300 Commlink enables customers to utilise higher amp loads that cannot be connected directly to the Power Management Systems such as the BP35 or J35 ranges.

Where loads can not be connected directly to a Power Management system and need to be connected directly to battery terminals.

For Example, additional solar, inverter, CPAP machine – without a BC300 CommLink, the essential battery information on charging and discharging that these devices create is not captured.

This potentially leads to incorrect readings on the user's App or RV displays such as Odyssey, JControl or Trek.

Devices that are power management critical and require a permanent connection to a battery, such as Sleep Apnea CPAP devices, should be connected directly to the battery through a BC300 CommLink.

The Shunt and the CommLink

The BC300 Commlink consists of the BC300 Shunt and the CommLink.  The BC300 is the device attached to the battery terminal's negative and measures voltage, amps, time and temperature, which are used in the calculations to provide State of Charge (SOC) and State of Health (SOH) in conjunction with Time Remaining.

The Commlink connects to the Power Management system such as the BP35 or J35 via a CAN cable. It then communicates back down to the BC300 connected to the battery via BMPRO’s exclusive Bluetooth enabled comms protocols.

Find the full range of BMPRO products below

Finally, BMPRO products are available from Couplemate in Wynnum, Queensland. Please get in touch with us before visiting to ensure we have sufficient stock.

Additional information

Weight 1.2 kg
Dimensions 8 × 15 × 30 cm

Reviews

There are no reviews yet.

Be the first to review “BC300 plus Commlink”

Your email address will not be published.