Standard Japanese LM Bearing Kit

Standard Japanese LM Bearing Kit

Standard Japanese LM bearing kit includes front and back trailer bearings, bearing seal and pressed steel hub cover.

The standard holden trailer Japanese bearing kit is also known as an LM wheel bearing kit. Any reputable trailer parts store carries quality kits.

We recommend NSK bearing kits to be reliable for high-speed highway use. Japanese bearings can be difficult to locate. There are many low-quality, non-Japanese bearing kits in the market that are prone to failure.

LM Holden | Standard

• Inner ID 31.75mm, OD 59.10mm (67048)
• Outer ID 19.05mm, OD 45.20mm (11949)
• Bearing Seal ID 37.5mm, OD 59.10mm (491015)
• Grease Cap 45.20mm (CM497)

LM Holden | Standard Marine

• Inner ID 31.75mm, OD 59.10mm (67048)
• Outer ID 19.05mm, OD 45.20mm (11949)
• Bearing Seal ID 37.5mm, OD 59.10mm (492020)
• Grease Cap 45.20mm (CM497)

Al-ko recommends the following bearing ratings;

• 750kg - 39mm Round Axle (Holden Bearings).
• 1000kg - 40mm Square Axle (Holden Bearings).
• 1250kg - 40mm Square Axle (Composite Bearings).
• 1450kg - 45mm Round or Square Axle (Ford or Slimline Bearings).
• 1450kg - 50mm Round or Square Axle (Ford or Slimline Bearings).
• 1600kg - 45mm Round or Square Axle (Parallel Bearings).
• 1600kg - 50mm Round or Square Axle (Parallel Bearings).
• 2250kg - 50mm Square or 60mm Round Axles (2.25t Bearings).

Why do I need to remove the old bearing cups?

It is wise to remove the old bearing cups when replacing bearings. Cups and races are subject to wear and tear. If you witness carbon black in your grease or black grease, cups and bearing races need to be replaced immediately.

China and India produce low-quality bearings with inferior coatings and low tolerances. These bearings wear quickly and are not suitable for long-haul, high-speed use.

Review more bearings below

• Parallel Bearing Kit
• Ford SL Japanese Bearing Kit
• 2t Bearing Kit suit Alko Hub Drums
• 3t Japanese Bearing Kit – Suit Al-ko Hubs

Holden Trailer Bearing Kit