2t Dexter Bearing Kits to suit Trailers and Caravans
2t Dexter Bearing Kits suit American Dexter marine trailers and Caravans. Couplemate axle builds all use NSK long haul Japanese bearings.
Melbourne Trailer and Caravan Supplies (MTCS) were the Australian distributors of Dexter Trailer products, in Melbourne for over 30 years.
These products included NSK Dexter Bearings Melbourne and other Dexter products and spare parts.
Dexter in recent years purchased Al-ko International and then integrated MTCS into the Al-ko distribution network,
2t Dexter bearings are difficult to identify because there are several variations in outer bearings and seals. The inner bearing will be consistent (25580).
The bearing kit from NSK Japan includes front and back bearings, seal and pressed steel hub cover. There are 7 Dexter bearing kits with different bearings and seals.
Note: The most important to do is to measure the seal's outside and inside diameter. The inside diameter can be tricky to measure. In this case, measure the seal axle journal.
2t Dexter Bearing Kit (CM484USA2T)
- Bearing ID 44.45mm, OD 82.93mm – 25580/20
- Outer ID 31.75mm, OD 61.95mm – 15123/245
- Seal ID 1.937″ OD 3.375″ – 33940
- Grease Cap DC2441
2t Dexter Bearing Kit (CM484USA2T-2.00)
- Bearing ID 44.45mm, OD 82.93mm – 25580/20
- Outer ID 31.75mm, OD 61.95mm – 15123/245
- Seal ID 1.937″ OD 3.375″ – 33970
- Grease Cap DC2441
2t Dexter Bearing Kit (CM484USA2T-2.125)
- Inner ID 44.45mm, OD 82.93mm – 25580/20
- Outer ID 31.75mm, OD 61.95mm – 15123/245
- Seal ID 2.125", OD 3.376" – GS-2125DL (Double Lip)
- Grease Cap DC2441
2t Dexter Bearing Kit (CM484USA2T-2.25)
- Inner ID 44.45mm, OD 82.93mm – 25580/20
- Outer ID 31.75mm, OD 61.95mm – 15123/245
- Seal ID 2.25, OD 3.376" – GS-2250DL (Double Lip)
- Grease Cap DC2441
Melbourne Trailers 2t Dexter Bearing Kit (CM484MEL2T)
- Inner ID 44.45mm, OD 82.93mm – 25580/20
- Outer ID 31.75mm, OD 59.10mm – 67048/10
- Seal ID 50mm, OD 85mm – 64190
- Grease Cap CM498
Melbourne Trailers 2t Dexter Bearing Marine Kit (CM484MEL2TM)
- Inner ID 44.45mm, OD 82.93mm – 25580/20
- Outer ID 31.75mm, OD 61.95mm – 15123/245
- Seal ID 50mm, OD 85mm – 82130
- Grease Cap CM498
Dexter Dust Cap with Rubber Grommet Ring
Bearings are rated as follows
- 1450kg - 45mm Round or Square Axle (Ford or Slimline Bearings)
- 1450kg - 50mm Round or Square Axle (Ford or Slimline Bearings)
- 1600kg - 45mm Round or Square Axle (Parallel Bearings)
- 1600kg - 50mm Round or Square Axle (Parallel Bearings)
- 45mm Round or Square Axle (Dexter 1.6t Bearings)
- 1600kg - 50mm Round or Square Axle (Dexter 1.8t Bearings)
- 2250kg - 50mm Square or 60mm Round Axles (2.25t Bearings)
It is wise to remove the old bearing cups when replacing bearings. Cups and races are subject to wear and tear. If you witness carbon black in your grease or black grease, cups and races need to be replaced immediately.
Low-quality bearings have poor coatings and low tolerances. These bearings wear quickly and are not suitable for long-haul, high-speed use.
Use high temperature bearing grease for use at high speeds.
Fits the following hub, disc and drums
Additional information
Weight | 1 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Select Bearing Kit | CM484USA2T, CM484USA2T-2.00, CM484USA2T-2.125, CM484USA2T-2.25, CM484MEL2T, CM484MEL2TM, CM484USA2TM |
Reviews
There are no reviews yet.