- 45mm Round Axle rated @ 1450kg
- 2 X Galvanised Hydaulic Calipers + Disc Pads + Mounting Bolts.
- 2 x Anchor Plates Welded on Axle.
- 2 x Galvanised Disc Rotors + Bearings + Nuts
Add master cylinder and bracket if required. 3/4" for single axle, 7/8" cylinder for tandem setups.
How to calculate Face to Face measurement on your axle. Measure the wheel offset. The offset is the distance between the inside of the hub on the rim and the outside of the rubber. Add 25mm or the distance between the rubber and the chassis. Multiply by 2 for two side and then add your chassis width.
Do not forget to leave your phone number at checkout. If you selections look mismatched, I will call you.
