- 2 x 45mm Round Axles. (2700kg capacity)
- 2 x 9" Hydraulic Backing Plate with Park
Brake.
- 2 x Weld Rings
- 2 x 9" Ford, Holden, Landcrusier Drums +
Bearings.
- 2 x Lazy Hubs + Bearings.
- 2 x 5
Leaf Tandem Springs. 60mm wide
- 2 x Tandem Spring Sides + Hangers +
Shackle Plates + Shackle Bolts
- 2 x U Bolt Sets
- 1 x Hydraulic Cylinder + Bracket.
- 1 x 2t Override Brake Coupling.
- 1 x Brake Cable Kit for Park Brake
All you need to tell me is your axle width. Measure
the offset in your wheel (measurement from where wheel bolts onto the hub to the
outer tyre). Measure your chassis width. Add 25mm each side for clearance
between wheel and chassis. You now have the total face to face measurement of
your axle.
Example: Offset is 125mm. Chassis Width is 1750mm. Your
face to face measurement is 2050mm.
All Axles come assembled ready to install.
Bracket positions - 825mm from Centre
hanger to front and back hangers.
Distance between wheels - 893mm
Length of Spring from Eye to Eye -
700mm
Offset - 386mm
